 |
| My Flat White has a round glob of thin foam. |
Answer: I bought my wife a Breville Barista Touch for Christmas. She wanted it but I use it. I have become the family barista. I can't let a coffee brewing machine of that calibre sit unused.
As a new-to-the-coffee-scene novice, I settled on the flat white as my coffee of choice. The Barista Touch has a number of automatic brew settings. Among them is flat white, one part espresso and two parts heated and foamed milk.
Before starting
- Fill the water tank almost to the maximum fill line.
- Fill the coffee hopper. Do not overfill. Do not use green beans.
- Gather everything you will need:
- portafilter
- dosing funnel
- double shot filter basket (While learning, I used the dual wall filter basket. I quickly advanced to using the single wall basket.)
- dosing funnel
- Razor tool for levelling ground coffee in portafilter with basket inserted
- an 8.5 ounce, insulated coffee cup
- stainless steel container for heating and frothing milk
- ample cold, whole milk (not a low fat skim milk type)
- sugar
- teaspoon
- two small towels or dish clothes–one dry and one damp.
Step 1 – Press the on/off button and select Flat White on the screen
From the main drinks menu, touch Flat White on the touchscreen.
The screen will show three steps: Grind, Brew and Milk. All are preset but feel free to modify. It took me a few cups of flat white before I got the grind size and the grind time correct.
Step 2 – Grind and dose
Snap the filter basket, either the single wall or the dual wall, into the portafilter. If you forget, coffee grounds will fly from the machine. To stop the grinding, push the grind icon on the screen.
With the chosen filter basket snapped into the portafilter, attach the dosing funnel to the top of the portafilter and slide all into the grinder cradle.
Touch “Grind” or push in the portafilter to start grinding. For this first flat white, accept the default settings.
After grinding, remove all from the cradle, use tamping tool to compact ground coffee, after the initial tamping, remove dosing funnel and finish tamping down coffee. Carefully level ground coffee using the Razor tool if necessary. After using the Razor, tap and tamp one last time. (I find I rarely use the Razor. The grind and time I have set with trial and error are perfect.)
Step 3 – Attach portafilter and extract espresso
Lock the portafilter, minus the dosing filter, onto the group head by rotating the handle to the right until it stops.
Place a dual wall, insulated cup under the spouts. I like to preheat my cup.
On the flat white screen ensure "Double" is selected and touch “Brew” to start extraction. (In my book, "Double" makes enough espresso for one flat white for one person.)
Watch the flow: two thin streams should start at the seven second mark or a second or two later. The brewing will finish at the preset time. (At this point, I like to add the sugar, if any, to the hot espresso.)
Step 4 – Heat and froth milk
Fill the stainless steel milk jug with whole milk to just above the fill line on the steam wand. The stainless steel jug has minimum and maximum levels marked on the side but I have a difficult time seeing the marks. I prefer using the fill line on the steam wand when making flat whites. This results in enough milk and froth for two flat whites. (I use the maximum fill line when making two lattes.)
The tip of the steam wand should be sitting in the milk just below the surface. The jug must be sitting on the temperature sensor. Do not let the sensor get wet. The sensor must be kept dry.
- On the Flat White screen, check the Milk settings:
- Temperature: medium to medium‑high (around 150 °F is typical).
- Froth level: medium low (4). This results in less foam than called for by latte or cappuccino).
Touch “Milk” to start auto heating and foaming.
Make sure the stainless steel jug is sitting on the sensor at all times. This is important.
Step 5 – Flush and wipe the steam wand when finished
As soon as the Breville Barista Touch is finished heating and texturing the milk, remove the jug. With the steam wand extended at 45 degrees, wipe the wand and tip with a damp cloth. Keep the wand extended at the 45 degree position.
Place the corner of a dry towel or small dish cloth over the milk heating/frothing sensor. It must not get wet. Now, lower the wand to the down position. It will automatically purge itself shooting two short bursts of hot water and a burst of steam into the drip tray. This clears milk from inside the wand.
Step 6 – Pour milk and add foam
Begin pouring from a few centimetres above the milk surface so the milk integrates with the espresso and pushes crema to the top.
The cup should contain about two ounces espresso and you are adding four ounces of milk. When the milk is poured, bring the jug closer to the drink surface and pour a white circle of silky, small-bubbled froth into the centre of the flat white. I like to stir the drink gently until I get a coffee-brown circular pattern in the milk froth.
After enjoying your flat white
Every time you finish enjoying a milk‑based drink, do these quick tasks to keep the machine performing well.
1. Knock out puck and rinse portafilter
Remove the portafilter and knock out and discard the coffee puck.
Remove the filter basket and rinse both the basket and portafilter under hot water to remove coffee oils and grounds. Cleaning both with a little soapy water is a good idea. Rinse well.
2. Quick group head flush
With clean portafilter with filter basket snapped into place, attach the empty portafilter to the group head just as you would to brew coffee. Place an empty cup below as if you were brewing an espresso. Push “Brew” to run hot water briefly through the group head. I believe five or six seconds is enough. This rinses away any residue of coffee grounds. The rinse water is captured in the empty cup. You should see coffee grounds in the water. Some users do this step without the portafilter and filter basket in place. They use a very large cup to catch the rinse water. While doing this, I keep a dry cloth over the milk/foam sensor. Remember the warning, "Keep dry".
Remove portafilter with filter basket inserted, if you used the portafilter in the purging operation. Separate, wash and leave to dry.
3. Drip tray and work area
Check the drip tray. It will have collected some water contaminated with a little milk. Clean and rinse all the drip tray parts.
Wipe any spilled coffee or milk from the surrounding surfaces. Again, take care not to let the milk temp sensor get wet.
Of course, Breville has posted some instructions. Here is a link to:How to make a flat white at home
Make your Flat White for Two
I never, absolutely never, make just one Flat White. I always make two. One for me and one for my wife. The espresso machine was a Christmas gift from me to her. A gift should not be a lot of work to use. It should be fun and with me doing the brewing and clean-up, it is fun -- for her.
To modify the above instructions so that you pull two double-shots of espresso to make two flat whites, do the following:
- Pull your first espresso shot as above but after grinding and brewing stop. Do not heat and froth the milk. Set aside the cup with the espresso.
- Knock out the puck, wipe and dry the filter basket and repeat Step 2 - Grind and Dose followed by Step 3 - Attach portafilter and extract espresso. The second espresso shot will be collected in a second dual walled, insulated cup.
- Set the second espresso aside with the first. We are now ready to heat and froth the milk for both drinks. Go to Step 4 - Heat and froth milk.
- Steam and froth the milk as instructed. As I mentioned earlier, I always make enough frothed milk to make two flat whites.
- Pour the heated/frothed milk into the insulated, glass cups. Voila! Two flat whites. Clean the machine and work area as instructed.
